A low temperature thermoplastic sheet material for fabrication of orthopedic braces, orthoses, external immobilization devices and rehabilitation aids. ORFIBRACE is applied directly to the patient after it is activated, which is done by heating at a temperature of 65°C (149°F) to 160°C (325°F).

• Partial elastic memory for allowing some remolding 
• Stable plasticity prevents draping during application 
• Coated with a non-stick coating 
• High rigidity when cooled and good resistance to mechanical strain 
• Can be activated in a splint pan or a convection oven 
• Latex free
• Not suited for applications requiring a lot of detail

Matches the characteristics of Orfit NS in a different color. Orfit Natural NS is material with outstanding elastic qualities and a protective, non-adhesive coating. Becomes crystal clear at a temperature of 140°F (60°C), so the lower anatomic layer can be carefully checked throughout the application process.

• Soft stretch
• Full memory
• Temporarily cohesive when required
• Superb surface finishing
• Exemplary lifespan
• Latex free

Other benefits include:
• 100% memory
• Extremely elastic (100%) without tearing
• Non-adhesive except when using dry heat and sufficient pressure
• Transparent when activation temperature is reached
• Very smooth coating
• Controlled stretch
• Available in Soft and Stiff versions to suit therapist's preference for less or more resistance to stretch
• Sold Individually
• Latex free

• Complete elastic memory; remoldable
• Self-adhesive when heated; can be taken apart in case of accidental bonding
• Transparent at activation temperature
• Excellent resistance to fingerprinting
• Can be activated in a hot water bath at 140 degree F (60degree C) or in a convection oven at 180 degree F (80 degree C)
• Latex free

Hook & loop closure allows adjustments for fluctuations in soft tissue mass. Padding increases comfort. Use for lower back pain, sciatica, rheumatoid arthritis, osteoporosis and bulging discs. 1/8" (3.2mm) non-perforated Aquaplast®-T splinting material with Polycushion liner. For size, measure circumference of waist. Ships flat and must be fitted by a medical professional. Latex free (Design Copyright  Patterson Medical Company.)
A. With Polycushion® padding
B. Without padding
C. Circumference of waist
D. Height of corset, sacrum to thoracic region

)

Two lateral zippers provide custom fit without added bulk. Custom-molded long corset gives rigid stabilization and three points of leverage support on the full body. 1/8" (3.2mm) 1% perforated Aquaplast-T material creates a slim, lightweight corset. Does not include padding or stockinette. For size, measure circumference of waist. (Design copyright Patterson Medical Company.)

Measurements

• Small = 23.8"-28.9" (61-74cm)
• Medium = 28.9"-34.7" (75-89cm)
• Large = 34.7"-41.7" (90-107cm)

Ships flat and must be fitted by a medical professional. Latex free (Design Copyright  Patterson Medical Company)

Provides compression or support. Can be used to secure dressings or orthotics. Adheres to itself, not to skin, and remains secure without clips. Maintains consistent compression with non-slip support that won’t loosen even during strenuous activity. Lightweight and cool. Not sterile.